For mobile, landscape view is recommended.
The slides for each presentation at the ASETSDefense 2020 sessions are available below. The 2020 ASETSDefense Workshop was held virtually August 4–6 and covered all aspects of alternative coatings and surface treatments, with emphasis on performance, service data, approvals and implementation of clean coatings.
|
Session 1: Aerospace and Defense Needs, Approaches, and Environmental Issues |
|
|
Where Are We in Adopting Alternatives in Europe and North America? |
Nihad Ben Salah, NBS-Materials & Processes Consulting |
|
Michael Ellenbecker, ACGIH |
|
|
Scot Bryant, Noblis |
|
|
Session 2. DoD Corrosion Policy and Oversight Office |
|
|
Robert Herron, Corrosion, Policy & Oversight |
|
|
Eric Linderman, Army ASA(ALT) |
|
|
Walter Juzukonis, U.S. Air Force |
|
|
Edward Lemieux, DON, DASN(RDT&E) |
|
|
Panel Session (No Slides) |
Walter Juzukonis, U.S. Air Force Leslie Miller, LMI Robert Herron, Corrosion, Policy & Oversight Eric Linderman, Army ASA(ALT) Edward Lemieux, DON, DASN(RDT&E) |
|
Session 3. Accelerated Corrosion Testing and Tracking |
|
|
Test Method Development for Aerospace Coatings and Corrosion |
Fritz Friedersdorf, Luna Innovations |
|
Christine Sanders, U.S. NRL |
|
|
Scientific Analysis of the Efficacy of Freshwater Rinse on Aircraft as the Basis for Improved Maintenance |
Andy Dutch |
|
Likelihood-Based Modeling to Predict Atmospheric Corrosion Rates to Enable CBM Approaches |
Erica Macha |
|
David Rusk, NAWCAD |
|
|
Corrosion Sensors for Condition-based Maintenance: A Critical Review and Potential Way Ahead |
Ludmila 't Hoen-Velterop |
|
Session 4: Additive Manufacturing and Repair |
|
|
Matt Siopis, U.S. Army Research Laboratory |
|
|
Paul Allison, University of Alabama |
|
|
Environmental Advantages of the Use of AM in Addition to Subtractive Manufacturing |
Timothy Eden, Applied Research Laboratory - The Pennsylvania State University |
| The Use of Wire based Deposition for Reduced Energy Usage in Manufacturing | Mike Klecka, Raytheon Technologies Research Center |
| Cold Spray Use in Component Repair for Military Aircraft | Michael Nicholas, Boeing |
| Aluminum Powders and the Effects of Hydroxides on AM | Victor Champagne, U.S. Army Research Laboratory |
|
Session 5: Paint and Depaint Systems |
|
|
Michael Brindza, NAWCAD |
|
|
Randall Straw, AFLCMC/EZP - USAF |
|
|
Handheld LASER Depaint and Surface Preparations for Aerospace Assets |
Casey Jones, Adapt Laser |
| Plasma Electrolytic Depaint | Solomon Berman, IBC Materials & Technologies, LLC |
| Pulse Automated Waterjet Stripping System (PAWSS) for Organic and Inorganic Coating Removal |
Fredrick Laguines Jay Randolph Tod Hickman Wiley Bloom |
|
Session 6: Depot Perspectives and Mission Readiness - Naval Aircraft |
|
|
Naval Aviation Enterprise (NAE) Corrosion Management Board (CMB) |
Julia Russell, NAWC-AD |
|
Advancements of Inorganic Coating Technologies at NAVAIR Depots for Improved Readiness |
Ruben Prado, NAVAIR |
|
Chris Gladson, NAVAIR |
|
| Aerospace Organic Coating Improvements | Micaela Rionda, NAVAIR |
| Make Corrosion Go Away with NC Primer and Cold Spray! |
Luc Doan, NAVAIR |
|
Session 7: Depot Perspectives and Mission Readiness - Helicopters, Vehicles |
|
|
Patrick Taylor and Noah Lieb, Jensen Hughes |
|
|
U.S. Army Aviation and Missile Command Heavy Metal (Cr6+) Elimination Strategy |
Mark Feathers, U.S. Army Aviation and Missile Command |
|
Demonstration of Tagnite Anodizing at Corpus Christi Army Depot (CCAD) |
Stephen Howison, U.S. Army CCAD |
| Demonstration and Transition of Chrome-free Pretreatment at Anniston Army Depot |
Tom Considine, U.S .Army Research Laboratory Marion Sanders |
| Sustainable Cleaners, Epoxy Primers and Zinc-rich Primers |
Daniel Pope, U.S. Army Research Laboratory |
|
Session 8: Depot Perspectives and Mission Readiness - Alternate Approaches |
|
|
Air Force Corrosion Prevention and Control Office (AFCPCO) Overview |
Lindsay Davis, AFCPCO |
|
Demonstration of Commercial Appliques on Aircraft Parts and Ground Support Equipment |
Scott Ruggiero, AFLCMC/EZPT-CPCO |
|
On-aircraft Non-chrome Coating Evaluation for the HH-60W Jolly Green II |
Fritz Friedersdorf, Luna Innovations |
| Advanced Protocols Development for Environmental Degradation Testing |
Nick Wilson, U.S. Air Force Research Laboratory |
| Reducing Paint and Solvent Usage with Robotic Paint Systems |
Shane Groves, WR-ALC CMXG |
| Hazardous Material Reduction Governance Board (HMR GB), An AFMC ESOH Council Initiative | Caroline LeClair, AFSC/ENRB OL-Hill |
| USAF Project Corrosion Monitoring on A/C (WP-201710) | Monali Patel, AFLCMC/EZPT-CPCO |
|
Session 9: OEM Technology Development |
|
|
Novel Enabling Technologies to Insert Laser Ablation into Repair and Production Facilities |
Kady Gregersen, Boeing |
|
Weilong Zhang, Raytheon Technologies Research Center |
|
|
Assessment of Microwave Loss Caused by Non-Hexavalent Chromium-Based Conversion Coatings |
Daniel Urban |
| Adhesive Bond Primer |
Kathleen Rowland, Lockheed Martin |
| Technology Development and REACH Compliance for F-35 |
Scott Fetter |
| Path to Hexavalent Chromium Elimination | Michelle McElvaine, Boeing |
|
Session 10: Corrosion Control Technologies - ZnNi |
|
|
F-16 Corrosion Preventive Materials – Topics from Falcon 2020 F-16 CTIM |
Jerry Brown, Lockheed Martin |
|
Overview of Cadmium Substitution for Aero Mil Connector Applications |
Gerald Tredan, CadSTAR |
|
Matt O'Keefe, Missouri University of Science and Technology Bill Fahrenholtz, Missouri University of Science and Technology Tarek Nahlawi, Dipsol Of America James Claypool, Missouri University of Science and Technology Steve Gaydos, Boeing Felix Almodovar, Dipsol Of America Kevin Foster, Missouri University of Science and Technology Dave Zika, Boeing |
|
| Cd Alternatives for Connectors |
Tod Hickman, ES3 |
| ZnNi Plating Performance on Complex Parts - Corrosion Risk Mapping |
Alan Rose, Corrdesa |
| Non-drip ZnNi Brush Plating (ESTCP Project) |
Randall Straw |
| Alternatives to Cadmium on EWIS | Joe Marchica, NAWCAD |